Select a Category

How to show different time phasor diagram with oscillography data in Viewpoint UR Engineering?


Oscillography and phasor diagram are two powerful tools to troubleshoot power issue in GE Viewpoint UR Engineering. After you load an oscillography, you can click on the Phasor button (circled in red in the picture below) to turn on the phasor diagram. There is a green line, which ties to the phasor diagram […]

How to enter Ethernet settings in Post Glover NGR HMI


Post Glover Natural Ground Resistor (NGR) uses a smart Human Machine Interface (HMI) to set up configuration parameter. Steps to configure HMI’s Ethernet settings are not well documented. Sometime if parameters are not enter properly, they do not stay after power is cycled. Here are steps to configure its Ethernet settings.

Steps to configure […]

How to disable Post Glover NGR parameter protection


Post Glover Natural Ground Resistor (NGR) uses a Human Machine Interface (HMI) for control and communication. In order to program the HMI, its parameter protection should be disabled. Below are the steps to disable the password protection.

Steps to disable password protection

Press ESC/BACK button to the Main screen as shown below. Press MENU/5 […]